Tyre Change At Home: A Comprehensive Guide

6 things you should never do when changing a tire Maxread
6 things you should never do when changing a tire Maxread from www.idahopress.com


Changing a tyre can be a daunting task, especially if you're doing it for the first time. However, with the right tools, knowledge, and a bit of practice, it can be a straightforward process. Not to mention, it can save you both time and money. In this article, we'll guide you through the process of changing a tyre at home.

Tools Needed

Before you start changing your tyre, you'll need a few tools. These include a jack, lug wrench, spare tyre, and a wheel chock. You can buy these tools separately or purchase a tyre changing kit that includes all the necessary tools.

Step-by-Step Guide

Step 1: Find a Safe Spot

Firstly, ensure that your car is parked on a level surface away from traffic. Turn on your hazard lights and engage the parking brake.

Step 2: Loosen the Lug Nuts

Use the lug wrench to loosen the lug nuts on the tyre you want to change. Do not remove them yet, just loosen them.

Step 3: Jack Up the Car

Place the jack under the car's designated jacking point and raise the car until the tyre is off the ground.

Step 4: Remove the Lug Nuts and Tyre

Remove the lug nuts and carefully pull the tyre off the car.

Step 5: Install the Spare Tyre

Place the spare tyre on the car's wheelbase and hand-tighten the lug nuts.

Step 6: Lower the Car

Lower the car until the spare tyre is in contact with the ground.

Step 7: Tighten the Lug Nuts

Use the lug wrench to tighten the lug nuts in a star pattern.

Step 8: Lower the Car Completely

Lower the car completely and remove the jack.

Step 9: Check the Tyre Pressure

Check the tyre pressure of the spare tyre and adjust if necessary.

Step 10: Store the Flat Tyre and Tools

Store the flat tyre and tools in the trunk of your car.

Tips for Changing Tyres at Home

- Always ensure that your car is on a level surface before jacking it up. - Use a wheel chock to prevent the car from rolling. - Never loosen or tighten lug nuts while the car is raised on the jack. - Tighten lug nuts in a star pattern to ensure even pressure distribution. - Always check the spare tyre's pressure before installing it.


Changing a tyre at home is a skill that every driver should possess. By following these simple steps and tips, you can change your tyre with ease and confidence. Remember to always prioritize safety, and you'll be back on the road in no time.

Post a Comment for "Tyre Change At Home: A Comprehensive Guide"